On-Grid Solar System in Sattur

An on-grid solar system in Sattur is the most cost-effective way to bring down your TANGEDCO electricity bill — and in a town where factories, printing units and match-manufacturing workshops run heavy electrical loads through the day, the timing could not be better. An on-grid system feeds power directly from your rooftop panels into your own premises first, and any surplus flows back into the TNEB grid, earning you an export credit that offsets your night-time imports. No batteries, no complicated switching — just clean daytime generation matched almost perfectly against the kind of round-the-clock industrial consumption that Sattur's Virudhunagar district economy depends on.

What makes Sattur's situation particularly favourable for on-grid solar is the alignment between generation and demand. Industrial units along the NH-44 corridor consume the most power during daylight hours — exactly when a south-facing rooftop array produces at full capacity. Whether you run a small offset-printing press or a larger factory shed, the solar generation curve and your load curve tend to overlap closely from roughly 9 am to 4 pm. That overlap is where the real savings happen: the electricity your panels generate is consumed on-site before TANGEDCO even sees it, which means you are paying zero per unit for those hours.

Green Point Solar designs and installs on-grid systems across Sattur and the wider Virudhunagar district, handling everything from the initial site survey right through to TANGEDCO net-metering commissioning. We are MNRE-approved and work with Tier-1 modules and branded grid-tie inverters, so the system your sign off on is the system that actually goes onto your roof.

How an on-grid system works with TANGEDCO net metering

The mechanics are straightforward. Your rooftop panels generate DC power, which the on-grid inverter converts to AC and feeds into your premises at 230 V (or 415 V three-phase for industrial connections). Your building's loads draw from solar first. When generation exceeds demand — say, early afternoon on a clear April day — the surplus exports through a bi-directional meter that TANGEDCO installs as part of the net-metering approval. The exported units appear as a credit on your monthly bill, reducing what you owe for the units you import at night.

For Sattur's factories and commercial units, a three-phase on-grid inverter can be tied directly to an industrial connection, running machinery, compressors and lighting on solar during peak production hours. The economics stack up quickly: a 10 kW system at roughly ₹62,000 per kW produces around 40–50 units a day, and at current industrial TANGEDCO tariff rates, that generation is worth several thousand rupees a month — every month, for the next 25-plus years.

On-grid vs off-grid — which is right for Sattur?

The single question that determines the answer: does your location have a reliable TANGEDCO supply most of the time? If yes, on-grid is almost always the better financial choice. Here is why:

Most premises in Sattur town have a dependable TANGEDCO supply, which makes on-grid the practical choice for the majority of homes, shops and factory units within the municipal limits. The investment is lower, the subsidy applies in full, and the payback period is meaningfully shorter than an off-grid or hybrid setup of the same capacity.

System sizes and what they mean for a Sattur property

The PM Surya Ghar subsidy advantage for on-grid systems

On-grid residential rooftop systems are the primary target of the PM Surya Ghar: Muft Bijli Yojana subsidy. The structure is straightforward: ₹30,000 per kW for the first 2 kW, and ₹18,000 for the third kilowatt, capping at ₹78,000 for a 3 kW or larger residential system. Off-grid and commercial systems do not receive the same residential subsidy structure, which is another reason on-grid is the preferred route for Sattur homeowners. The subsidy is credited directly to your bank account after TANGEDCO commissions the net meter — we handle all the portal registration and paperwork in-house so the process does not hold up your installation.

What the net-metering process looks like in Sattur

1. Site survey: We visit your Sattur premises, assess roof space, orientation and your last few TANGEDCO bills to size the system correctly.
2. Design and proposal: You receive a clear document showing the panel count, inverter model, estimated monthly generation and itemised pricing — including the subsidy reduction for residential systems.
3. Installation: Our own technicians mount panels, erect the structure, run cables, install the inverter and carry out earthing and surge protection. Typically one to three days for residential, longer for larger commercial systems.
4. Application to TANGEDCO: We submit the net-metering application on your behalf along with the required inspection documentation. TANGEDCO carries out a technical inspection of your installation.
5. Bi-directional meter installation: TANGEDCO replaces your existing meter with a bi-directional unit and energises the system for export.
6. Subsidy registration: For residential systems, we complete the PM Surya Ghar national portal registration so the subsidy is credited to your account after TANGEDCO confirms commissioning.

Why Green Point Solar for your Sattur on-grid system

Choosing an on-grid system ties your electricity savings to the quality and longevity of the hardware. A grid-tie inverter that fails after three years or panels that degrade faster than their datasheet promises will quietly erode the economics over time. We use components with proven performance track records and back the system with local after-sales service — meaning any fault that arises is attended to by a team that can physically reach your Sattur rooftop, not a helpline in a distant city.

Explore more solar options in and around Sattur

• Rooftop Solar System in Sattur
• Off-Grid Solar System in Sattur
• Commercial Solar System in Sattur
• On-Grid Solar in Kovilpatti
• On-Grid Solar in Kayathar
• Contact Us for a Free Quote

Frequently asked questions